haohan注塑工序废气中非甲烷总烃监测GDX-502甲烷柱2m*1/8

注塑成型是使用很广泛的一种塑料、橡胶制品成型方法。在注塑成型过程中，原料因加热等分解产生一定量的有机烟气，以非甲烷总烃为主。

浩瀚色谱（山东）应用技术开发有限公司通过对不同注塑废气中的非甲烷总烃的监测，浅析非甲烷总烃排放的特点，提出注塑废气防治和监测计划的建议。

名称：GDX-502甲烷柱
规格：2m*1/8，60-80目
编号：20220630003
*高温度：250°C  
Injection molding is a widely used molding method for plastic and rubber products. During the injection molding process, the raw materials are decomposed by heating to generate a certain amount of organic flue gas, mainly non-methane total hydrocarbons.

Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. analyzes the characteristics of non-methane total hydrocarbon emissions through the monitoring of non-methane total hydrocarbons in different injection molding waste gases, and puts forward suggestions on injection molding waste gas prevention and monitoring plans.

Name: GDX-502 Methane Column
Specifications: 2m*1/8, 60-80 mesh
Number: 20220630003
Maximum temperature: 250°C