HAOHAN粗孔硅胶试剂100-200目HH-silica gel

粗孔球形硅胶性质、用途与生产工艺化学性质毛玻璃状半透明颗粒。
不溶于水和无机酸，但溶于氢氟酸和浓苛性钠溶液中。机械强度高、耐磨性好。在饱和湿度下对水蒸气的吸附容量一般是细孔硅胶的2倍以上。具有理想而稳定的孔隙结构。用途粗孔块状硅胶。
生产方法硫酸法又分油柱成型和空气造Chemicalbook粒两种工艺，前者属于逐渐淘汰的方法。其工艺与细孔球形硅胶基本一致，区别在于老化工序，制备粗孔球形硅胶时，从接受槽流出的水凝胶先用蒸汽老化8h以上，老化后在水洗槽中用0.1%--0.2%稀硫酸浸泡12h，再经洗涤(除Na2SO4)、烘干、筛分、干燥，制得粗孔球形硅胶。

名称：粗 孔 硅 胶
粒度：100-200目， 100g
*高温度：500°C
编号：20240326006
应用：气体烃类的分离
The properties, uses, and production processes of coarse pore spherical silica gel. Chemical properties of ground glass like semi transparent particles.
Insoluble in water and inorganic acids, but soluble in hydrofluoric acid and concentrated caustic soda solutions. High mechanical strength and good wear resistance. The adsorption capacity of water vapor under saturated humidity is generally more than twice that of mesoporous silica gel. Having an ideal and stable pore structure. Application: Coarse pore block shaped silicone.
The production method of sulfuric acid is divided into two processes: oil column forming and air based chemical book granulation, with the former being a gradually phased out method. The process is basically the same as that of the fine porous spherical silica gel, the difference is the aging process. When preparing the coarse porous spherical silica gel, the hydrogel flowing out of the receiving tank is first steam aged for more than 8 hours, then soaked in 0.1% -0.2% dilute sulfuric acid for 12 hours in the water washing tank, and then washed (except Na2SO4), dried, screened, and dried to obtain the coarse porous spherical silica gel.
Name: Coarse pore silicone
Particle size: 100-200 mesh, 100g
Maximum temperature: 500 ° C
Number: 20240326006
Application: Separation of gaseous hydrocarbons