Agilent工作场所空气有毒物质测定无机含碳化合物测定填充柱TDX01+13X

本标准规定了监测工作场所空气中无机含碳化合物浓度的方法。 本标准适用于工作场所空气中无机含碳化合物浓度的测定。
空气中的一氧化碳用注射器采集,直接进样。一氧化碳在氢气中经分子筛与碳多孔小球串联柱分 离,通过镍催化剂转化为甲烷,用氢焰离子化检测器检测;以保留时间定性,峰高或峰面积定量。
 

名称：填充柱

固定相：1.2m×3mm5A 或13X分子筛,放在前;0.8m×3mm 柱内装碳多孔小球;两柱串联

型号：5A+TDX-01

应用：GBZ 160.28-2004-T 工作场所空气有毒物质测定 无机含碳化合物

适用于：安捷伦，岛津，赛默飞，瓦里安，布鲁克，PE

This standard specifies the methods for monitoring the concentration of inorganic carbon compounds in the air of the workplace. This standard is applicable to the determination of the concentration of inorganic carbon compounds in the air of the workplace.
Carbon monoxide in the air is collected using a syringe and injected directly. Carbon monoxide is separated from hydrogen gas by a series column of molecular sieves and carbon porous spheres. It is then converted to methane using a nickel catalyst and detected using a hydrogen flame ionization detector; Qualitative retention time, quantitative peak height or peak area.
Name: Filler Column
Fixed phase: 1.2m × 3mm5A or 13X molecular sieve, placed in front; 0.8m × 3mm column with carbon porous spheres inside; Two columns connected in series
Model: 5A+TDX-01
Application: GBZ 160.28-2004-T Determination of Toxic Substances in Workplace Air Inorganic Carbon Compounds
Applicable to: Agilent, Shimadzu, Thermo Fisher, Varian, Brooke, PE