工业氢气分析项目执行国家标准(GB/T3634.1—2006).其中氧、氩和氮含量的测定采用的是气相色谱法,配备脱氧柱和切换柱两次进样,测定样品气中氩和氮的含量,用差减法计算出样品.此方法人为地两次手动进样,每次分析样品在六通阀的定量管中由于受温度压力不同给分析结果带来人为误差.
浩瀚色谱（山东）应用技术开发有限公司，针对国标氢中氧氩测定的不足，研制1根专用填充柱测定氧氩，分析时间短，3分钟完成一次分析，氧氩分离度大，峰型对称，效率高。
名称：HH-O2AR填充柱
规格：3mt*1/8，60-80Mesh
*高使用温度：180°C
应用：工业氢中氧氩测定的1柱1次进样系统
适用于：
安捷伦490在线/便携，4890,5890,6890,7820,7890,8860,8890
岛津GC-14C，GC-2010，GC-2014，GC-2030
赛默飞1310,1300,1610,1600
瓦里安3800系列
布鲁克PE580,590,680,690
磐诺A90，福立GC9790，华爱，天瑞，天美，GC7900，川仪，北分瑞利，东西电子，鲁南瑞虹，捷岛/科晓
The industrial hydrogen analysis project follows the national standard (GB/T3634.1-2006). The determination of oxygen, argon, and nitrogen content is carried out using gas chromatography, equipped with a deoxygenation column and a switching column for two injections. The content of argon and nitrogen in the sample gas is determined, and the sample is calculated by subtraction This party has manually injected samples twice, and each time the sample is analyzed in the quantitative tube of the six way valve, the analysis results are subject to human error due to temperature and pressure differences
Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. has developed a dedicated packed column for the determination of oxygen and argon in hydrogen in response to the shortcomings of the national standard. The analysis time is short, with a completion time of 3 minutes. The oxygen and argon separation degree is high, the peak shape is symmetrical, and the efficiency is high.
Name: HH-O2AR Filled Column
Specification: 3mt * 1/8, 60-80Mesh
Maximum operating temperature: 180 ° C
Application: One column, one injection system for the determination of oxygen and argon in industrial hydrogen
Applicable to:
Agilent 490 online/portable, 48905890689088608890
Shimadzu GC-14C, GC-2010，GC-2014，GC-2030
Thermo Fisher Scientific 1310130016101600
Varian 3800 Series
Brooke PE580590680690
Panno A90, Fuli GC9790, Huaai, Tianrui, Tianmei, GC7900， Chuanyi, Beifen Ruili, Dongxi Electronics, Lunan Ruihong, Jiedao/Kexiao
扫一扫，手机浏览
