浩瀚Tenax TA硅烷化不锈钢填充柱应用安捷伦7890上4m*1/8

Tenax-TA 一种2,6-二苯呋喃多孔聚合物树脂，应用于气体、液体和固体中的挥发性物质或半挥发性物质的吸附性采集，亦可用于高湿度样品中的挥发物和用作填充材料，与短程热解吸系统连用，可检测到ppb和ppt水平的挥发物。

化学名：2,6-二苯呋喃多孔聚合物
使用特点：
使用温度可达350℃
良好的疏水性
老化后基线稳定
替代Tenax-GC
物化性质：表面积35m2/g；孔体积2.4cm3/g；平均孔径200nm；密度0.25g/cm3。
应用领域：GC用填料和吸附剂，主要分析水、土壤、大气、呼吸气、香精香料和室内空气的高沸点化合物，如醇、酚、胺、醛、酮和卤代芳烃等。

名称：硅烷化不锈钢填充柱
型号：TENAX,60-80目
规格：4m*1/8
zui高使用温度：350°C
编号：20241217006

适用于：安捷伦，岛津，赛默飞，瓦里安，布鲁克，PE，磐诺，北分瑞利，东西电子，科创，华爱，郎溪，川仪，福立，天瑞，天美，川仪，鲁南瑞虹等

 

Tenax TA is a 2,6-diphenylfuran porous polymer resin used for the adsorption collection of volatile or semi volatile substances in gases, liquids, and solids. It can also be used for volatile compounds in high humidity samples and as a filling material. When used in conjunction with short-range thermal desorption systems, it can detect volatile compounds at ppb and ppt levels.
Chemical name: 2,6-diphenylfuran porous polymer
Usage characteristics:
The operating temperature can reach 350 ℃
Good hydrophobicity
Baseline stability after aging
Replace Tenax GC
Physical and chemical properties: surface area of 35m2/g; Pore volume 2.4cm3/g; The average pore size is 200nm; Density of 0.25g/cm3.
Application field: fillers and adsorbents for GC, which mainly analyze high boiling point compounds of water, soil, atmosphere, breathing gas, essence and indoor air, such as alcohols, phenols, amines, aldehydes, ketones and halogenated aromatics.
Name: Silanized Stainless Steel Filled Column
model: TENAX, 60-80 mesh
Specification: 4m * 1/8
Maximum operating temperature: 350 ° C
Number: 20241217006
Applicable to: Agilent, Shimadzu, Thermo Fisher, Varian, Brooke, PE， Panno, Beifen Ruili, Dongxi Electronics, Kechuang, Huaai, Langxi, Chuanyi, Fuli, Tianrui, Tianmei, Chuanyi, Lunan Ruihong, etc